Nothing is more nightmare than to stick up with blue screens on your laptop or PC with the most notorious error, “Video TDR Failure.” This BSOD or death blue screen closes all applications on your software, and you cannot do anything except restart your machine. Video TDR failure Windows 10 is not a glitch of Microsoft, the maker of the operating system, but somewhat intrinsically related with third-party software. We often load third-party software for different needs, and they can sometimes be the significant problem makers. Let’s figure out how to stop code video TDR failure with ease.
Some root causes of the Video TDR failure on Windows 10
If you are having problems in the memory of your pc, some issues in the hard drive, some driver issues, or the system gets corrupt, you can face blue screen issues. One may feel disturbed during working or gaming, getting the BSOD errors. Still, it is one of the Windows 10 Operating System beauties to save your computer from extensive damages, including a complete crash of the hard disc and the graphic card. Thus we can say this error works as a protective barrier to save the hardware and software of your computer.
However, video TDR failure can be fixed following several methods, and for that, one needs to have some technical knowledge. If you do not have that much knowledge on the technical side, this article can guide you to solve the issues with your blue screen errors.
Fixing the Video TDR failure Windows 10 problems
Make sure to make a system restore point before attempting to solve video TDR failure windows 10. It is needed to be on the safe side to get back the operating system in good configuration to an earlier date if anything happens with the operating system.
It is best to work in the safe mode to solve the TDR failure, particularly atikmpag.sys, igdkmd64.sys or nvlddmkm.sys on your Windows 10 operating system. Never give up on the BSOD problems as long as you can solve them on your own. Let us discuss various methods.
1. Rolling back driver to stop code video TDR failure
Rolling back driver – Many have observed that video TDR failure windows 10 error pops up after an update in the graphics card’s driver. The driver may crash after an update because some software or hardware is not compatible with the latest update, and thus it crashes. Therefore, rolling back to the last good configuration can solve the problems. For moving back to the good times, one has to follow few steps.
After opening the “Start” menu, type “devmgmt.msc.” A list of video drivers will pop up. Find your video driver that is crashing and double click on it. Now open the “Roll Back Driver” tab and click the mouse as directed on the screen. With few clicks, you will be able to roll back to the last good driver software. It is one of the methods to overcome stop code video TDR failure.
However, if the button for Roll Back is grey, the controller is made inactive by the update or the operating system. Thus, manually uninstall the updated driver and search the internet for the old driver working fine with the operating system. Then, download and install it from the manufacturer’s website. Installation should also be done manually.
2. Installing the latest updates to stop code video TDR failure
Installing the latest updates – The graphic card is often the root cause of the video TDR failure. Therefore one should always try to stay updated with the newest side of the software. However, before installing the update, make sure your pc can support the latest specifications required to run the graphic card without any glitches.
However, if your software and hardware can support the update, it is best to avoid VSI or Video scheduler internal error, much like the BSOD. One can download and install the drivers selecting from the list that includes software like Driver Genius, Driver Booster, Driver Easy, and likewise.
While manually updating the driver, go to the “Start” menu and press enter after typing “devmgmt.msc.” Now expand the pop-up “Display Adapters.” Next, click “Video Driver” followed by “Update Driver.” Finally, select your preference for update methods and restart the pc after the update is complete.
3. Uninstalling and reinstalling the video card driver
Uninstalling and reinstalling the video card driver – If you are experiencing glitches even after rolling back or updating the driver for stop code video TDR failure error, it is best to uninstall and reinstall the driver of the video card. The process is more or less the same; type the “devmgmt.msc” in the “Start” menu and then press enter. You will get the driver with the right click of your mouse. Click the “Uninstall Device” to follow all the directions coming on your screen.
Go to the manufacturer’s website or any other suitable driver download website mentioned above and download the required driver. For example, you may need the AMD, NVIDIA, or Intel driver. Select the driver according to your hardware configuration, and then select the graphic card model to download the required driver. It may fix your video TDR failure windows 10 errors.
4. Solution of Nvlddmkm.sys error
Solution of Nvlddmkm.sys error – If you use an NVIDIA graphic card, you may experience a Blue Screen of error death or BSOD with your nvlddmkm.sys file. It is the most probable cause to face video TDR failure with this graphic card. It is best to uninstall the driver software and again install it following the same method mentioned above.
5. Solution for AMD graphic card failure
Solution for AMD graphic card failure – AMD graphic cards face BSOD error by the users if the user is prompted with atikmpag.sys and the respective error name. Some solution can fix if problem. If any of the above solutions do not solve the problem, the user should follow the below-mentioned steps.
Open C:\Windows\System32\drivers and trace “atikmpag.sys.”
Now change the name. You may write “atikmpag.sys.old.” Ultimately, you will delete this newly named file, but one has to rename it for the time being.
Now either replace the driver with the new one or reinstall it. Type c:\ATI to locate the file “atikmdag.sy_” and copy the same to your desktop.
Now in the “Start” menu, type “cmd.” After right-clicking the prompt, choose “Run as Administrator” and follow the commands like:
Expand.exe atikmdag.sy_ Atikmdag.sys
chdir desktop Expand –r atikmdag.sy_ atikmdag.sys
Now copy the recent atikmdag.sys to C:\Windows\System32\drivers . Restart your computer. You may expect to get rid of the error.
6. Fixing Iddkmg64.sys
Fixing Iddkmg64.sys – If you have an Intel graphic card, you may experience this error. It is best to uninstall the HD driver of your graphic card and install it again.
7. Analyzing Dump file
Analyzing Dump file – You know that the dump file is necessary to determine why the stop code video TDR failure error reflects on your screen. It is time to analyze the minidump file in your system, and for that, you have to follow the below steps:-
At the start, type “Run” and then press Enter. Again type sysdm.cpl and enter. Now, click “Advanced” followed by “Settings.” You will get it inside the “Startup & Recovery.” Now, view the dropdown menu by clicking it. It will be under “Write Debugging Information.” Check the “Small Memory Dump (256 kb)” and click “OK.” The location of the dump file will be “%SystemRoot%\Minidump,” and you can discover it in C:\Windows\Minidump of your Windows 10 operating system.
8. Fixing with RUN CHKDSK command
Fixing with RUN CHKDSK command – If you are still getting the BSOD error, you can also run the CHKDSK command to fix it. Following the steps below can give a solution to your problem:-
Hold Windows Key + X and select the “Command Prompt.” You become the Admin. Type “chkdsk c: /f /r” You may swap the letter “c” with any other if it is necessary.
Click “Y” and then press “Enter.” Restart your computer. If you are having typical disk issues, this method will give a solution. The BSOD error will get fixed if there are any disk issues.
9. Changing the PCI Express of Power Management
Changing the PCI Express of Power Management – If your video TDR failure is continuing, it is best to change your PCI Express of Power management by going inside the settings and doing the below needful:-
At “Start,” click “Run.” Now, type “powercfg.cpl” and enter. Now select “High Performance” and click and then select “Change Plan Settings.” Now select “Changed Advanced Power Settings” and click with the mouse.
Find out and expand “PCI Express.”
Again expand “Link State Power Management.” Select “On Battery“and “Plugged In” and turn off both the icons. Save the settings and restart the computer to run it error-free.
10. Running a clean boot
Running a clean boot – If you feel that Safe Mode is the best option to get rid of video TDR failure windows 10 and stabilize the operating system, go for clean-boot Windows 10 and disable the services and the Startup that may be the root of the error.
Start your Windows 10 in Safe Mode. Click the Start icon and look for System Configuration.
Select the “General” tab and then select “Selective Startup.” Disable the “Load startup items” and “Load System Services.” Select “Apply” and click.
Again go to the “Startup Section.” Now select “Open Task Manager” and click it.
Choose all the applications with “Enable” status and select “Disable.” You have to do it one by one for all applications that are enabled.
Finally, it is time to reboot your computer and feel the difference.
11. Disable or avoid using overclocking tools
Disable or avoid using overclocking tools – Many users, mainly gamers, often use memory overclocking tools. These tools help to improve their gaming experience. If the laptop or the pc does not have enough cooling options like the cooler pads, extra fans, etc., the Operating System of Windows 10 shuts it down so that there is no Hard Disk Drive corruption and data loss. Thus your pc screen may turn blue and give video TDR failure windows 10 error message.
It is, therefore, best to avoid the overclocking tools or if you have one in your pc, then disable it. If you are unsure which application needs to be disabled, it is best to disable GPU-Z, MSI Afterburner or CPU-Z. Now reset your computer clock to the default settings and avoid BSOD problems.
12. Resetting the BIOS of your computer
Resetting the BIOS of your computer – The BIOS of the computer not only gives the details of the hardware but the settings inside the BIOS can be adjusted to get the best performance. Changing the settings inside the BIOS can often invite video TDR failure, giving you the famous BSOD blue screen. It is, therefore, best to reset the BIOS of your computer and work with the default settings. Follow the steps below to reset your computer BIOS.
After turning on your computer and immediately press a key to enter the BIOS Setup, one should do it instantly so that the computer does not boot. It may be F2, F12, DEL, F10, or any other key as per the computer. Then, go to the “Advance” BIOS section. Select “Reset BIOS Configuration Data.” Next, “Enable” the data and select and set it as “Default.” After “Saving” the settings, click “Exit.” With this setting, you can get rid of the blue screen error of your computer.
Conclusion on how to stop code video TDR failure
Video TDR failure can happen to anybody using a computer. However, it often happens more to the gamers and people who fiddle with the graphic cards for various occupational purposes. It is one of the most miserable situations when you see a blue screen booting with an error message. If you are expiring BSOD problems with your Windows 10 Operating System, it is best to try any of the above methods and get rid of the same.
Please note that all the ways may not fulfill the need for all computers and you have to know your graphic card model and brand and do the needful. Again, one can try other methods, too, like resetting the BIOS, checking the disks, and overcoming the situation. One can try the above processes at home before calling a professional. Be a little tech-savvy and try the above methods yourself before spending money taking professional service.